All services are done by a Certified SIG SAUER and Certified Glock Armorist.
Glock pistols serviced: All Gen1, Gen2, Gen3 and Gen4 with the exception of the G18 (select fire)
Field inspection (diagnostic)
This verifies proper operation of the mechanical and safety functions of the pistol.
Field inspection and cleaning
Same as above with basic cleaning and lubrication included.
Annual detail stripping
This is a complete disassembly, inspection of all mechanical and safety functions, inspection of the slide and frame, plus a complete cleaning and lubrication.
Recoil Spring Assembly (RSA) replacement
Glock recommends that Gen1, Gen2 and Gen3 RSAs be replaced every 3,000 rounds.
Gen4 should be replaced every 5,000 rounds.
Sig Sauer pistols serviced: P220, P224, P225, P226, P227, P228, P229, P238, and P239
Function check (diagnostic)
This verifies proper operation of the mechanical and safety functions of the pistol.
Function check and cleaning
Same as above with basic cleaning and lubrication included.
Annual detail stripping
This is a complete disassembly, inspection of all mechanical and safety functions, inspection of the slide and frame, plus a complete cleaning and lubrication.
Spring Kit
This replaces all the springs designed to wear out.
Recoil Spring Assembly (RSA) replacement
Sig recommends the RSA be replaced every 5,000 rounds.
Short Reset Trigger (SRT) installation
This will shorten the triggers reset about 60%.
Only available on P220, P225, P226, P229 and P239
Standard or short trigger installation
Replaces the standard trigger with a short trigger or the short trigger with a standard trigger.
*Both Glock and Sig Sauer DO NOT recommend using handloads or reloaded ammunition.
*Only Glock or Sig Sauer factory parts for customer requested maintenance/ repairs are used.